From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Aug 11 2006 - 19:03:05 ART
From the DocCD - "Using the Cisco IOS Command-Line Interface"
Designating a Keystroke as a Command Entry
You can configure the system to recognize a particular keystroke (key
combination or sequence) as command aliases. In other words, you can set
a keystroke as a shortcut for executing a command. To enable the system
to interpret a keystroke as a command, use the either of the following
key combinations before entering the command sequence:
Keystrokes
Ctrl-V or Esc, Q
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hc
f_c/ch10/cfh100.htm#wp1001965
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Khalid Akhtar (khakhtar)
Sent: Friday, August 11, 2006 1:46 PM
To: ccielab@groupstudy.com
Subject: Using ? In passord
Does someone know if we can use ? In the password (i.e. test?ccie)? If
yes what is the trick?
Thanks
Khalid
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART