From: ismail el-shalh (ishelh_mdsa@yahoo.com)
Date: Thu Aug 10 2006 - 22:52:26 ART
Hi Brian,
Thanks for the clarification But still I am not able to get the concept of why we usually set the output to a loopback interface!
for example in LAB 14, Task 11.1 (NAT on a Stick) you used this command in your solution.
R2
interface loopback 0
ip nat inside
inter fas0/0
ip addd 172.16.0.2 255.255.255.0 secondary
ip address 167.1.27.2 255.255.255.0
ip nat outside
ip policy route-map POLICY
ip nat pool INSIDE_GLOBAL 167.1.27.100 167.1.27.199 netmask 255.255.255.0
ip nat inside source list INSIDE_LOCAL pool INSIDE_GLOBAL
ip access-list standard INSIDE_LOCAL
permit 172.16.0.0 0.0.0.255
!
!
route-map POLICY permit 10
match ip address INSIDE_LOCAL
set interface Loopback0 <------------- How this command is helping here?
Brian Dennis <bdennis@internetworkexpert.com> wrote:
From the DocCD:
set interface
To indicate where to output packets that pass a match clause of a route
map for policy routing, use the set interface command in route-map
configuration mode. To delete an entry, use the no form of this command.
set interface interface-type interface-number [...interface-type
interface-number]
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fiprrp_r/ind_r/1rfindp2.htm#wp1020570
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ismail el-shalh
Sent: Thursday, August 10, 2006 5:15 PM
To: ccielab
Subject: Policy Based Routing Question "set interface Loopback0"
Dear Group, what does "set interface Loopback0" means in the following
configuration :
interface FastEthernet0/0
ip address 167.1.5.5 255.255.255.0
ip policy route-map POLICY
access-list 30 permit 167.1.5.0 0.0.0.255
interface loopback 0
ip address 150.1.5.5 255.255.255.0
route-map POLICY permit 10
match ip address 30
set interface Loopback0
Thanks,
Ismail
---------------------------------
Do you Yahoo!?
Next-gen email? Have it all with the all-new Yahoo! Mail Beta.
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART