From: Scott Morris (swm@emanon.com)
Date: Wed Aug 09 2006 - 00:44:34 ART
That's been a long-standing thing... If you use shutdown on the same side
as the "backup" command, then the router assumes you meant to do that and
won't backup! Try shutdown from the other router.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ELDHO PAUL
Sent: Tuesday, August 08, 2006 11:40 PM
To: ccielab@groupstudy.com
Subject: Backup interface
Hi,
If I configure one interface as the backup interface of another using
int s3/0
backup delay 60 300
backup interface Serial2/0
Is it that s2/0 will come up only if the cable is unplugged from s3/0?
If I do a shut down on s3/0, the serial interface 2/0 doesn't come up. Is it
an expected behaviour ?
Regards,
Eldho
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART