From: Jens Petter (jenseike@start.no)
Date: Tue Aug 08 2006 - 13:05:57 ART
Your isp needs a route to that linknet between pix and adsl router.. You
should
Bridge the adsl router and you are good to go...
Jens
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Aamir Aziz
Sent: 8. august 2006 17:44
To: Guyler, Rik
Cc: ccielab@groupstudy.com
Subject: Re: Simple scenario for PIX
No i meant that the ADSL router is getting dynamic public IP from ISP, the
question is what network do i configure between the PIX and ADSL router,
public (but i dont have any static IP's from ISP) or private (doesnt seem to
work with private) so what to do?
Thanks
Aamir
On 8/8/06, Guyler, Rik <rguyler@shp-dayton.org> wrote:
>
> Aamir, you say that you should be getting a dynamic address form the ISP
> but
> yet it appears that you statically set the address on the outside
> interface.
> Weird but true...I've seen some devices not allow you through unless you
> actually get your address from that device, regardless if you use the same
> address or not.
>
> Try using "ip address outside dhcp setroute" as an alternative.
>
> Also, whenever I setup DSL or cable Internet access, I like to have the
> ISP
> device setup as a bridge so I can terminate the public address on my
> firewall. That way I can configure all the security myself as well as
> remote access, which will likely need some form of dynamic DNS since you
> are
> getting a dynamic address. The downside to doing this is that if you are
> using PPPOE, you will have to setup those parameters on your PIX instead
> of
> the DSL device.
>
> Rik
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Aamir Aziz
> Sent: Tuesday, August 08, 2006 10:58 AM
> To: ccielab@groupstudy.com
> Subject: Simple scenario for PIX
>
> Hi there ppl
>
> I have a simple scenario for PIX 506E but i cant seem to get it working,
> any
> help is appreciated:
>
> ADSL Router ----------PIX 506E-----------PC
>
> ADSL Router is getting dynamic public IP from ISP.
> ADSL router Local IP is = 10.1.1.1
>
> PIX outside = 10.1.1.2
> PIX inside = 192.168.1.2
>
> PC = 192.168.1.1
>
> PIX Version 6.3(5)
> ip address outside 10.1.1.2
> ip address inside 192.168.1.2 255.255.255.0 ip audit info action alarm ip
> audit attack action alarm pdm logging informational 100 pdm history enable
> arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0
> 0.0.0.0 0 0 route outside 0.0.0.0 0.0.0.0 10.1.1.1
>
> The ADSL router (Linksys) is also doing NATing. I have no static public
> IP.
>
> But net is not working on the PC, what am I missing here?
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART