From: Skinner, Stephen (Stephen.Skinner@rbs.co.uk)
Date: Thu Aug 03 2006 - 11:37:02 ART
Hi ,
We use 10gb as the cost reference,
That way all links under 1.54mb to 256k will have a different cost .
1gb would mean all links under 1.544mb would be given the same cost .
HTH
Stephen Skinner
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
Sent: 03 August 2006 15:12
To: 'Elias Chari'
Cc: ccielab@groupstudy.com
Subject: RE: auto-cost reference-bandwidth
*** WARNING : This message originates from the Internet ***
So I take it that the options for MBITS (20000) used with command is
irrelevant. R4(config-router)#Auto-cost REference-bandwidth 20000.
Thx.
_____
From: Elias Chari [mailto:elias.chari@gmail.com]
Sent: Thursday, August 03, 2006 9:03 AM
To: trevelle@wowway.com
Cc: ccielab@groupstudy.com
Subject: Re: auto-cost reference-bandwidth
There is no method...it's a design decision. The router uses this value to
calculate the interface cost as opposed to the default.
In a production network all routers should be configured with the command,
in the ccie lab who knows...-)
Rgds
Elias
On 8/3/06, trevelle@wowway.com < trevelle@wowway.com
<mailto:trevelle@wowway.com> > wrote:
I understand that the auto-cost refernce-bandwidth command is used for
interface that are greater than 100 mbs so that you can have the correct
cost associated with that interface. My question is what method is used to
come up with the MBITS per second when using the auto-cost reference
bandwidth command.
R4(config-router)#AUto-cost REference-bandwidth ?
<1-4294967> The reference bandwidth in terms of Mbits per second
Thx in advance.
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART