From: cstubbs@tampabay.rr.com
Date: Wed Aug 02 2006 - 09:28:58 ART
We use Peribit's. They work very well. Our DR pipe is an OC3 and the
delay increases from 40ms to 1850ms, when we diable the compression and
accleration on the Peribit. This makes the ATM unusable.
----- Original Message -----
From: Jai Prakash <jpjsr06@gmail.com>
Date: Tuesday, August 1, 2006 7:04 pm
Subject: Re: bandwith shaper
To: Jens Petter Eikeland <jenseike@start.no>
Cc: ccielab@groupstudy.com
> Hi Jens,
>
> Packeteer is very good HW Appliance for Bandwidth Shaping.
>
> Here is the link where you will find lots of info
>
> http://www.packeteer.com/
>
>
> Best Regards,
> Jai
>
> On 8/1/06, Jens Petter Eikeland <jenseike@start.no> wrote:
> >
> > Hi all.
> >
> >
> >
> > Anybody that can recomend for me an hardware bandwith shaper
> appliance> that
> > are able to share my customers bandwith on
> > ip ranges/port. It would be an advantage if the shaper had some
> kind of
> > failover mechanism to backup shaper. Secondly it have
> > to have more than two interfaces, minimum 4 fa or ge interfaces.
> >
> >
> >
> > Thanks
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART