RE: EIGRP

From: Scott Morris (swm@emanon.com)
Date: Thu Aug 03 2006 - 14:01:45 ART


Do note that this was introduced in 12.3(14)T, so it would only be on the
12.4 mainline code. 12.4 is not the primary IOS at this point (most routers
run 12.3 mainline per earlier NetPro discussions).

HTH,

 
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
 
 

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Elias Chari
Sent: Thursday, August 03, 2006 11:01 AM
To: Sami
Cc: ccielab@groupstudy.com
Subject: Re: EIGRP

Yes, use the leak-map feature.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r
/rte_eih.htm#wp1097180

On 8/2/06, Sami <sy1977@gmail.com> wrote:
>
> Group,
>
> Is there any way EIGRP can send more specific routes alongwith summary ?
>
> Thanks
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART