From: nikolai (niko@4ovek.com)
Date: Thu Aug 03 2006 - 13:51:09 ART
"match-all" is a requirement for the second class-map that combines the
VLAN list AND the other criteria (ACL, DCSP, etc.) For the first
class-map, "use the match-any keyword to perform a logical-OR of all
matching statements under this class map. One or more match criteria
must be matched."
Also, I found out that the 3560 (12.2.25 SED1) in my lab doesn't support
"match vlan" under a class-map:
************************************
SW1(config)#class-map match-all VLAN
SW1(config-cmap)#match ?
access-group Access group
input-interface Select one or more input interfaces to match
ip IP specific values
***************************************
Nikolai
lenny lim wrote:
> Hi,
>
> For Per-port Per VLAN, you have to use "match-all".
>
> http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a0080115928.html#xtocid32
>
> tony hall <tony_hall123@hotmail.co.uk> wrote: Hi Lenn,
> Does it matter if we match all or any in first Class-map
>
> class-map match-all ANY
> match access-group 1
>
> Tony.
>
> _________________________________________________________________
> Be the first to hear what's new at MSN - sign up to our free newsletters!
> http://www.msn.co.uk/newsletters
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> ---------------------------------
> See the all-new, redesigned Yahoo.com. Check it out.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART