From: Russell Kelly \(rukelly\) (rukelly@cisco.com)
Date: Thu Aug 03 2006 - 13:46:40 ART
This is missing:
You need to do the following:
It has the following line :- neighbor RACKS route-map IN in
Which should be :- neighbor RACKS route-map BGP_IN in
And the route map needs to be added too just like the other two BBs:
route-map BGP_IN deny 10
match ip address prefix-list DEFAULT
!
route-map BGP_IN permit 10000
!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Bajo
Sent: 03 August 2006 17:44
To: devecchio
Cc: ccielab@groupstudy.com
Subject: Re: BB3 Config
This was posted in the IE forum (there is a search option on the Right
Top Corner).
On BB3 , do "no neighbor RACKS route-map IN in" if you have access to
it.
On 7/31/06, devecchio <devecchio.turner@sbcglobal.net> wrote:
>
> Guys,
>
>
>
> I see the following line in the BB3 config but no corresponding
> route-map to act on and I believe this is keeping me from receiving
> routes in Lab8 Section 4.4. on BB3. Has anyone seen the route-map IN
> in the BB3 config.
>
>
>
> neighbor RACKS route-map IN in
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART