From: Elias Chari (elias.chari@gmail.com)
Date: Thu Aug 03 2006 - 11:02:43 ART
There is no method...it's a design decision. The router uses this value to
calculate the interface cost as opposed to the default.
In a production network all routers should be configured with the command,
in the ccie lab who knows...-)
Rgds
Elias
On 8/3/06, trevelle@wowway.com <trevelle@wowway.com> wrote:
>
> I understand that the auto-cost refernce-bandwidth command is used for
> interface that are greater than 100 mbs so that you can have the correct
> cost associated with that interface. My question is what method is used to
> come up with the MBITS per second when using the auto-cost reference
> bandwidth command.
>
>
> R4(config-router)#AUto-cost REference-bandwidth ?
> <1-4294967> The reference bandwidth in terms of Mbits per second
>
> Thx in advance.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART