From: ismail el-shalh (ishelh_mdsa@yahoo.com)
Date: Wed Aug 02 2006 - 17:26:37 ART
Hi group,
please let me know if the way I am understanding the question is right or wrong,
the task is stating that since R5 is the only connection between the OSPF and RIP domains R4 and SW2 do not need specific reachability information about the rest of the network.
configure R5 to inject a default route into RIP to provide rechability to the OSPF domain.
R4 should load balance traffic destined to the OSPF domain between both R5 and SW2
I understood that R5 should not propagate any rip routes other than a default route but in the solution only "default-information originate" command was there! which means that also the other rip routes will get into R4 and SW2
here is my solution :
Rack1R5#show run | b router rip
router rip
version 2
network 139.1.0.0
default-information originate
distribute-list prefix DEFAULT out FastEthernet0/1
distribute-list prefix DEFAULT out Serial0/1
no auto-summary
ip prefix-list DEFAULT seq 5 permit 0.0.0.0/0
Rack1R4#show ip route rip
139.1.0.0/16 is variably subnetted, 4 subnets, 2 masks
R 139.1.58.0/24 [120/1] via 139.1.48.8, 00:00:02, Ethernet1
R* 0.0.0.0/0 [120/2] via 139.1.45.5, 00:00:07, Serial1
[120/2] via 139.1.48.8, 00:00:02, Ethernet1
---------------------------------
Groups are talking. We´re listening. Check out the handy changes to Yahoo! Groups.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART