From: Duane Dewitt (Duane.Dewitt@za.verizonbusiness.com)
Date: Mon Jul 31 2006 - 08:10:43 ART
One of the keys to the lab is to read ahead and do the correct config
the first time round.
Regards
Duane
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
devecchio
Sent: 31 July 2006 12:54 PM
To: bdennis@nternetworkexpert.com; bmcgahan@internetworkexpert.com
Cc: ccielab@groupstudy.com
Subject: FW: LAB 7 Task 5 and 5.7
For the Brians,
Others, Please chime in....
In task 5, on router 1 the send-community attribute was set for
neighbors
163.1.13.3 and 163.1.18.8 (R3/SW2). In the task, it never specified this
was necessary...now, granted in task 5.7 the community had to be set due
to the requirement of the routes released in the suppress were not to be
passed on outside of AS 300 , is there anyway for us to know before-hand
whether or not we should set this attribute or is it just best practice
for a transit AS?
Devecchio
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:49 ART