Re: How to use validate-update-source command

From: Bajo (bajoalex@gmail.com)
Date: Mon Jul 31 2006 - 07:54:29 ART


Hi Ismail,

And if you want to lab this: "Create a Frame Relay link between two routers
and assign each side two different subnet address (Say R1 150.1.1.1/24 and
R2 150.1.2.2/24) and see if you can get RIP going between them."

On 7/30/06, Plank, Jason <JPlank@concordefs.com> wrote:
>
> "The software ensures that the source IP address of incoming routing
> updates
> is on the same IP network as one of the addresses defined for the
> receiving
> interface."
>
> From the command lookup / DOC CD. This is on by default. I could see you
> "disabling" this with the NO command, but the behavior / command is on by
> default.
>
> -------------------
> Jason Plank, CCIE #16560
> Network Engineer
> 101 Bellevue Parkway
> Wilmington, DE 19809
> E-mail: JPlank@concordefs.com
> Phone: 302-793-5913
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Ismail AlShelh
> Sent: Sunday, July 30, 2006 6:48 PM
> To: ccielab@groupstudy.com
> Subject: How to use validate-update-source command
>
> ?
> Dear all,
>
>
> Can you please let me know how can I use the command
> validate-update-source
> under rip routing process, there is no much of documentation about
> explaining
> how this command works in Cisco website.
>
> Thanking your help in advance
> Ismail
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> -----------------------------------------
> The information in this message may be proprietary and/or
> confidential, and protected from disclosure. If the reader of this
> message is not the intended recipient, or an employee or agent
> responsible for delivering this message to the intended recipient,
> you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited. If you have
> received this communication in error, please notify First Data
> immediately by replying to this message and deleting it from your
> computer.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>

-- 
Kind Regards,

Bajo



This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:49 ART