Enable access for VTY

From: Rick Fox (rick.fox@tcsna.com)
Date: Sun Jul 30 2006 - 22:10:18 ART

• Next message: san: "Re: which way is correct, or both are?"
• Previous message: CCIEin2006: "Tricky One - Can Backbone router learn default route from NSSA?"
• Next in thread: secondie: "Re: Enable access for VTY"
• Maybe reply: secondie: "Re: Enable access for VTY"
• Maybe reply: Rick Fox: "RE: Enable access for VTY"
• Maybe reply: Paul Dardinski: "RE: Enable access for VTY"
• Maybe reply: Rick Fox: "RE: Enable access for VTY"
• Maybe reply: secondie: "Re: Enable access for VTY"
• Maybe reply: Gregory W. Posey Jr.: "Re: Enable access for VTY"
• Maybe reply: secondie: "Re: Enable access for VTY"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

So, is there a way to configure access so that when telneting to a
router, local authentication is used, and you are immediately in enable
mode?

The config provided from previous thread still requires additional login
to enable mode.

>> aaa new-model
>> aaa authentication login CONSOLE enable
>> aaa authentication login VTY local
>> !
>> line console 0
>> login authentication CONSOLE
>> !
>> line vty 0 4
>> login authentication VTY
>> !

• Next message: san: "Re: which way is correct, or both are?"
• Previous message: CCIEin2006: "Tricky One - Can Backbone router learn default route from NSSA?"
• Next in thread: secondie: "Re: Enable access for VTY"
• Maybe reply: secondie: "Re: Enable access for VTY"
• Maybe reply: Rick Fox: "RE: Enable access for VTY"
• Maybe reply: Paul Dardinski: "RE: Enable access for VTY"
• Maybe reply: Rick Fox: "RE: Enable access for VTY"
• Maybe reply: secondie: "Re: Enable access for VTY"
• Maybe reply: Gregory W. Posey Jr.: "Re: Enable access for VTY"
• Maybe reply: secondie: "Re: Enable access for VTY"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART