From: Darren Horobin (Darren.Horobin@ipi-group.co.uk)
Date: Fri Jul 28 2006 - 09:18:39 ART
Guys,
I have a problem. I need to priortise some citrix traffic for a
customer.
Don't question me on the original config as it's a legacy config Ive
inherited
The setup is as follows on the 3550
1 x access port coming from the customer LAN switches
1 x routed connection to the WAN
My thoughts on how to do this is to create a trunk between the 3550 and
the Lan switches and create a MAC ACL based on the source of the Citrix
server/s and then set the cos value.
Is their any other way I could do this as QoS on the 3550 is certainly
not my strong point
If you need any more info let me know
Cheers
Darren
Darren Horobin
Registered Office:
IP Infrastructures
Cedar Court Office Park
Denby Dale Road
Wakefield
WF4 3QZ
Tel: 0870 160 3537
Fax: 0870 160 3540
www.ipi-group.co.uk
Company Registration Number: 04657026
This email and any files transmitted with it are confidential and intended solely for the use of ccielab@groupstudy.com. If you are not the intended recipient be aware that any disclosure, copying distribution or use of the contents of this information is prohibited. If you have received this email in error please notify the system administrator. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART