From: Brian (briane@surewest.net)
Date: Mon Jul 24 2006 - 21:12:19 ART
For the 1200 series you will also need to specify option 60 and specify
the appropriate vci. This was not required with the 1000 series APs but
is with the 1100s and 1200s.
http://www.cisco.com/en/US/products/ps6366/products_configuration_exampl
e09186a0080665cdf.shtml#backinfo
You can also add an entry to DNS for CISCO-LWAPP-CONTROLLER with the IP
address of the controller and not use DHCP.
Brian
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sergio Silva
Sent: Monday, July 24, 2006 8:09 AM
To: HUZEFA RATLAMWALA
Cc: ccielab@groupstudy.com
Subject: Re: OT: WLAN issue
If your Access Points are on a different IP address to your
WISM/Wireless
controller, then you need to have the DHCP scope configured to send
Option
43 TLV field with the controller IP addresses in it.
Otherwise you will not build the LWAPP tunnel!
Regards
Serg
On 7/24/06, HUZEFA RATLAMWALA <ratlamwala.huzefa@gmail.com> wrote:
>
> Group
> Did anyone worked Aironet AIR-LAP1242AG-E-K9 ? I get this message when
I
> connect to the LAN controller.
> %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY and I am unable to
get
> an
> IP through DHCP.
>
> Huzefa
> **
>
>
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART