From: Mohamed T. Kondela (mtaib@sagia.gov.sa)
Date: Sun Jul 23 2006 - 05:44:35 ART
Hi group,
Recently I read a DocCD document on using distribute-list in conjunction
with route-map to deny a tagged prefix. I remember the config was
something like this.
R1-------------R2
R1 config
Prefix-list 1 matches 130.10.1.0/24
Route-map OSPF_SETTAG matches prefix-list 1
And set the tag to 1300
R1 redistributes this network into ospf and sends to R2 and he is
matching only TAG value 1300 and discard the route.
R2 config
Route-map OSPF_MATCHTAG 10 matches tag 1300 and deny that
OSPF_MATCHTAG 20 permit anything else.
Under ospf process 1
Distribute-list 1 route-map OSPF_MATCHTAG in
End
!
Now, the issue is, I am running 12.2(13)T but I couldn't find the option
'route-map' after '?' the distribute-list. Only other options are
available. Please let me know if any of you gone thru this.
Regards
Mohamed T. Kondela
Senior Network Engineer
IT Dept.
Fax: 4473037 x 303
mtaib@sagia.gov.sa
Saudi Arabian General Investment Authority
--------------------------------------------------------
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
--------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART