From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Sun Jul 23 2006 - 00:58:36 ART
So If I want stratum 3 on R4(being one hop from R3) and it R4 should
sync with R3 I just need
R4
Ntp server (r3 IP)
R3
Ntp master 2
?
Why does it take 5 mins to sync. When u debug it shows the time from R3
but it rejects it until it just gives up
Faryar
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: Saturday, July 22, 2006 1:08 PM
To: 'Sami'; 'Cisco certification'
Subject: RE: NTP
NTP Peers will try to mutually agree on a time (but nobody REALLY knows
what time it is)
NTP Server will peer with a master. The master has authority (in other
words it actually knows the time).
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
JNCIE #153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sami
Sent: Saturday, July 22, 2006 2:02 PM
To: Cisco certification
Subject: NTP
Group,
Could some one explian when to use ntp server and ntp peer command...I
have seen some workgroup solution some time they use ntp server othe
time they use ntp peer command.
Thanks
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART