From: Marvin Greenlee (marvingreenlee@yahoo.com)
Date: Fri Jul 21 2006 - 03:44:04 ART
You can use "set ip df" in a route-map if you are
doing policy routing. You can also use "crypto ipsec
df-bit set" if talking about IPSec traffic.
To allow higher sized MTU traffic, you may need to
enable jumbo frame support, depending on platform.
--- "Thunai Selvam (thunai)" <thunai@cisco.com> wrote:
> Hi all
>
> is there any command to set the DF bit on the
> router ( Don't
> fragment ) and which command enable the router to
> accept higher MTU
> packets ( IP MTU size )
>
> Regds
> Thunai
>
>
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART