From: Marco Antonio Trejo Lemus (mtrejo@ccreta.com)
Date: Wed Jul 19 2006 - 12:00:13 ART
-----Mensaje original-----
De: Cisco certification [mailto:ccielab@groupstudy.com]
Enviado el: Lunes, 10 de Julio de 2006 02:02 p.m.
Para: mtrejo@ccreta.com
Asunto: Please confirm (conf#ad071b80a8c59d47eedd6dc7cff9adc6)
Hi,
You have tried to post to a GroupStudy.com certification mailing list.
Because
the server does not recognize you as a confirmed poster, you will be
required
to authenticate that you are using a valid e-mail address and are not a
spammer. By confirming this e-mail you certify that you are not sending
Unsolicited Bulk Email (UBE).
PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
By confirming this e-mail you also certify the following:
1. The message does NOT break Cisco's Non-Disclosure requirements.
2. The message is NOT designed to advertise a commercial product.
3. You understand all postings become property of GroupStudy.com
4. You have searched the archives prior to posting.
5. The message is NOT inflammatory.
6. The message is NOT a test message.
To confirm, simply reply to this message. No editing is necessary. Once
confirmed, you will be able to post without additional confirmations.
Welcome to GroupStudy.com!
First time posters to GroupStudy.com are required to agree to the GroupStudy
terms and conditions.
Replying to this email, certifies you have read and agree to the GroupStudy
posting guidelines and terms and conditions.
--- Original Message Follows ---
Date: Mon, 10 Jul 2006 15:01:42 -0400
To: ccielab@groupstudy.com
From: mtrejo@ccreta.com
Subject: Routers Cisco 1760-V to don't make a double dial
Hi everybody
Could you help me?
Actually we bought:
2 Routers Cisco 1760-V
Four VIC's:
2 VIC2-2FXS
2 VIC2-2FXO
Two WICS
2 WIC-4ESW 4-Port Fast Ethernet Switch WAN Interface Card
2 WIC-2T dual-serial port WAN interface cards
The instalation of each cards it was the next:
Router_A
Slot 0: WIC-4ESW
Slot 1: WIC-2T
Slot 2: VIC2-2FXO
Slot 3: VIC2-2FXO
Router_B
Slot 0: WIC-4ESW
Slot 1: WIC-2T
Slot 2: VIC2-2FXS
Slot 3: VIC2-2FXS
Devices plugged
In the Router A
4 extensions from a NX-308 Hybrid Key System
In the Router B
4 Standar Telephone's
I already configure each VIC's ports whith medium complexity
(Original message truncated)
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART