From: Magmax (magmax@bigpond.net.au)
Date: Sun Jul 16 2006 - 09:14:55 ART
Godswill,
Thanks for your response. What I understand is both will be correct for lab
exam unless question specifies don't use version 2 command under rip process
Right?
I am trying to understand why I lost points in exam and I don't have gaps in
my knowledge
Regards,
Ubaid
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Godswill Oletu
Sent: Sunday, 16 July 2006 9:59 PM
To: Magmax; ccielab@groupstudy.com
Subject: Re: Some Questions
Ubaid,
By default RIP receives version 1 & version 2 but sends only version 1. You
can change this default behaviour by enabling version 2.
!
router rip
version 2
!
Now you are telling the router to receive version 2 & send version 2. The
interface commands are used to alter these behaviours.
You can see that you have some kind of over configuration on the second
option. Enabling version 2 under the router configuration mode is enough to
make the router to send & receive version 2.
Though the confguration in option 1 is good, and will meet the requirement
of enabling RIP, but keep your mind open as there are other RIP Tasks where
the solutions you have given might be the wrong ones.
You might have read it before, but take some time and refresh your mind on
RIP, the DocCD is a good place to go:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
_c/ipcprt2/1cfrip.htm#wp1000952
HTH
Godswill Oletu
CCIE #16464
----- Original Message -----
From: "Magmax" <magmax@bigpond.net.au>
To: <ccielab@groupstudy.com>
Sent: Sunday, July 16, 2006 4:42 AM
Subject: Some Questions
> Guys,
>
> I just started my ccie studies a month after failing my 2nd attempt. Here
> are few questions if anyone can help
>
>
> RIP
>
> Q.If question ask you to enable RIP v2 which is correct config.In my mind
> both should be ok for proctors
>
> router rip
> version 2
> no auto-summary
> passive-interface default
> no passive-interface Ethernet 0/0
> network 10.0.0.0
>
> OR
>
> router rip
> version 2
> no auto-summary
> passive-interface default
> no passive-interface Ethernet 0/0
> network 10.0.0.0
>
> Interface FastEthernet 0/0
> Ip rip send version 2
> Ip rip receive version 2
>
>
> Regards,
>
> Ubaid
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART