From: loke (loke14@gmail.com)
Date: Sat Jul 15 2006 - 00:24:07 ART
Yes 3640 and 3660 run ospf v3
On 7/13/06, Scott Morris <swm@emanon.com> wrote:
>
> You sure the 3640 does? None of the images I loaded on it would run it.
> They all took the command but did nothing (which I think is what the 3620
> did as well).
>
> I don't have a 3660 in my lab, so I can't test that out! :)
>
> Scott
>
> -----Original Message-----
> From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
> Sent: Thursday, July 13, 2006 10:08 AM
> To: Scott Morris; Russell Kelly (rukelly); Tim Chan;
> ccielab@groupstudy.com
> Subject: RE: R/S CCIE Lab Kit
>
> 3640 and 3660 support OSPFv3, 3620 does not.
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Scott Morris
> > Sent: Thursday, July 13, 2006 2:15 AM
> > To: 'Russell Kelly (rukelly)'; 'Tim Chan'; ccielab@groupstudy.com
> > Subject: RE: R/S CCIE Lab Kit
> >
> > OSPFv3 won't run on the 3600 series routers.
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE
> > #153, CISSP, et al.
> > CCSI/JNCI-M/JNCI-J
> > smorris@ipexpert.com
> > http://www.ipexpert.com
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Russell Kelly (rukelly)
> > Sent: Thursday, July 13, 2006 2:27 AM
> > To: Tim Chan; ccielab@groupstudy.com
> > Subject: RE: R/S CCIE Lab Kit
> >
> > Hi - Yeah you can enable ipv6 et al - but there was something it
> couldn't
> > do
> > -- possibly ospfv3 or another part of ipv6 that was needed (I remember
> > checking on CCO) --- however, I'm happy to be proved wrong and I'll
> drag
> > it outta the cupboard again! :-)
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Tim
> > Chan
> > Sent: 13 July 2006 00:18
> > To: ccielab@groupstudy.com
> > Subject: RE: R/S CCIE Lab Kit
> >
> > I have a 3620 that's running ipv6, and it's been working great for me.
> >
> > R3#sho ver
> > Cisco Internetwork Operating System Software IOS (tm) 3600 Software
> > (C3620-J1S3-M), Version 12.3(17), RELEASE SOFTWARE (fc2)
> >
> > ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc1)
> > ROM: 3600 Software (C3620-J1S3-M), Version 12.3(17), RELEASE SOFTWARE
> > (fc2)
> >
> > R3 uptime is 4 hours, 29 minutes
> > System returned to ROM by reload
> > System restarted at 11:42:58 pst Wed Jul 12 2006 System image file is
> > "flash:c3620-j1s3-mz.123-17.bin"
> >
> > cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes
> of
> > memory.
> > Processor board ID 16204030
> > R4700 CPU at 80MHz, Implementation 33, Rev 1.0 Bridging software.
> > X.25 software, Version 3.0.0.
> > TN3270 Emulation software.
> > 2 Ethernet/IEEE 802.3 interface(s)
> > 1 Serial network interface(s)
> > 4 Low-speed serial(sync/async) network interface(s) DRAM configuration
> is
> > 32
> > bits wide with parity disabled.
> > 29K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read/Write) 16384K bytes
> of
> > processor board PCMCIA Slot1 flash (Read/Write)
> >
> > Configuration register is 0x2102
> >
> > R3#conf t
> > Enter configuration commands, one per line. End with CNTL/Z.
> >
> > R3(config)#ipv6 unicast-routing ?
> > <cr>
> >
> > -tim
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > Russell Kelly (rukelly)
> > > Sent: Wednesday, July 12, 2006 3:50 PM
> > > To: loke; Marc Russell
> > > Cc: David Fuller; ccielab@groupstudy.com
> > > Subject: RE: R/S CCIE Lab Kit
> > >
> > > The 3620 can't do ipv6 (though it's capable of MPLS for the SP
> train)
> > > -- the 3640 is a good fit for the lab kit that requires 4+ FR
> > interfaces
> > > -- also not he 2600's need a ROMMON upgrade to run the 12.2(17)
> train
> > > and memory upgrades (The minimum boot ROM version is 12.1(3r)T1) --
> > > unless you want to mess around with TFTP boot parameters --
> > >
> >
> >
> >
> > ---------------------------------
> > Sneak preview the all-new Yahoo.com. It's not radically different.
> Just
> > radically better.
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART