From: Kayode Oladipo (kayoladipo@hotmail.com)
Date: Mon Jul 10 2006 - 17:10:39 ART
Marco,
You don't have to wait for a dialtone before you dial the extension on
the NX-308 Hybrid Key System. Just dial the access number and extension
at once and that'll do it.
HTH
Kayode
--------------------------------------------------------------------
From: mtrejo@ccreta.com
Reply-To: mtrejo@ccreta.com
To: ccielab@groupstudy.com
Subject: Routers Cisco 1760-V to don't make a double dial
Date: Mon, 10 Jul 2006 15:01:42 -0400
>Hi everybody
>
>Could you help me?
>
>Actually we bought:
>
>2 Routers Cisco 1760-V
>
>Four VIC's:
>2 VIC2-2FXS
>2 VIC2-2FXO
>
>Two WICS
>
>2 WIC-4ESW 4-Port Fast Ethernet Switch WAN Interface Card
>2 WIC-2T dual-serial port WAN interface cards
>
>The instalation of each cards it was the next:
>
>Router_A
>
>Slot 0: WIC-4ESW
>Slot 1: WIC-2T
>Slot 2: VIC2-2FXO
>Slot 3: VIC2-2FXO
>
>Router_B
>
>Slot 0: WIC-4ESW
>Slot 1: WIC-2T
>Slot 2: VIC2-2FXS
>Slot 3: VIC2-2FXS
>
>
>Devices plugged
>
>In the Router A
>
>4 extensions from a NX-308 Hybrid Key System
>
>
>
>
>In the Router B
>
>4 Standar Telephone's
>
>
>
>I already configure each VIC's ports whith medium complexity
>And the FastEthernet 0 in both Routers with ip addresses
192.168.2.29 and 192.168.2.28
>
>I already configure the WIC-4ESW to recive nodes in both routers
making a VLAN for the voip calls
>
>Router_A
> WIC-4ESW: 192.168.3.120
>
>Router_B
> WIC-4ESW: 192.168.3.10
>
>
>I already configure the cards VIC2-2FXO and the VIC2-2FXS for make
dial peers voice pots and
>dial peer voice voip
>
>Actually The Router_A:
> Recive 4 extensions from a NX-308 Hybrid Key System
>
>In the Router_B:
> Can make voip calls from the Standar Telephone to other VIC2-2FXS
ports and also can make it to
> Extensions of the NX-308
>
>The case:
>
>
>When i make a call from Router_B to a extension of the NX-308 Hybrid
Key System, I Dial a number of the
>dial peer voice pots in the Router_A to have a Dial tone and next
Dial again the extension of the NX-308
>Hybrid Key System
>
>
>What i need to do to make one dial?
>Can i make this?
>
>
>I read about the DID interfaces like a VIC-2DID compatible with the
1760-V routers that can make a direct dial, but i need to know if can
make it with the infraestructure that i have.
>
>
>Could you help me?
>
>
>Kindly
>
>Ing.Marco Antonio Trejo Lemus
>IT.Department
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART