From: D.H. Williams (draythw@gmail.com)
Date: Mon Jul 10 2006 - 16:18:13 ART
I could never get this to work.
R1 is running BVI 1 with ip 192.10.1.1 255.255.255.0, bridge irb etc.
(working fine, trust me)
R6 is setup with two subinterface, one of which is in the same vlan as R1
ethernet, but doing encap dot1q on it.
If I remove the encapsulation dot1q on r6 and just put an IP directly on
that interface and place it in same vlan as 1, it works like a champ; when
I do subinterface, I get "encapsulation failed" on my debug.
Appreciate any thoughts on this.
Sidenote
R1 ethernet doesn't have an IP, just bridge-group 1 tying it to BVI. R6
does have an IP address.
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART