From: Sami (sy1977@gmail.com)
Date: Sun Jul 09 2006 - 19:06:21 ART
I am also facing the same problem , everything works fine with brodacst
network..but with NBMA I always have problem when two diffrent key on HUB.
Appreciate if some one can test this on NBMA and confirm if it works or not?
Thanks
On 7/9/06, allboutcisco <frenzeus@streamyx.com> wrote:
>
> Hi group,
>
> I picked this thread up some time back. Till date, myself i have yet to be
> able to get it working after reloading of the routers, despite the
> numerous
> attempts with all the debugs, it jus seems that the rollover stops after a
> reload.
>
> Even attempts to wait "forever" the neighbor just wouldn't form. I believe
> i'm not the only person faced with this issue. Question is, is there
> really
> a way to get by this or the only way after a reload is to manually
> re-apply
> the "ip ospf message-digest-key" command on the hub?
>
> Appreciate if someone could shed some light, if being faced with this in
> the
> real lab, can i safely assume that the proctors will not reload the
> routers
> before grading or should i just NOT configure the authentication (thereby
> losing crucial points) to avoid neigbors not establishing if in the event
> that the proctors DO reload the routers?
>
> Any advice out there is greatly appreciated!
>
> Thanks.
>
> -K
>
> ----- Original Message -----
> From: "Scott Morris" <swm@emanon.com>
> To: "'Radioactive Frog'" <pbhatkoti@gmail.com>
> Cc: "'Larry Chuon'" <lchuon@gmail.com>; "'Cisco certification'"
> <ccielab@groupstudy.com>
> Sent: Monday, May 29, 2006 1:29 AM
> Subject: RE: OSPF authentication using rollover keys
>
>
> > Not sure about that (haven't tried real hard). According to the debugs,
> > it
> > sends with the keys it knows about. And there are notes about
> mismatched
> > keys (key-id not present on spoke side), but it just seems that after a
> > while the hub side gives up and thinks he's surrounded by idiots. :)
> >
> > Perhaps it's a count thing, in which case changing the frequency of your
> > hello's would change it. I was running on non-broadcast interface, so
> > things were only every 30 seconds anyway. I'm not by my systems at the
> > moment, so anyone else wanna give it a whirl?
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE
> > #153, CISSP, et al.
> > CCSI/JNCI
> > IPExpert CCIE Program Manager
> > IPExpert Sr. Technical Instructor
> > smorris@ipexpert.com
> > http://www.ipexpert.com
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Radioactive Frog
> > Sent: Sunday, May 28, 2006 10:28 AM
> > To: Scott Morris
> > Cc: Larry Chuon; Cisco certification
> > Subject: Re: OSPF authentication using rollover keys
> >
> > Is there any way, to reduce this convergence time from 10 minute to
> couple
> > of minute ?
> >
> > Frog.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART