From: Russell Kelly \(rukelly\) (rukelly@cisco.com)
Date: Sat Jul 08 2006 - 17:58:10 ART
OK -- so I was getting bored so I powered down the lab and played with my Son for a while -- powered it back up and ALL IS OK!!!??? All the virtual links are up and OK... --- this is crazy --- is it not? Anyone got an order of operation - or comments on this ---- absolutely crazy :-) Brian(s), Scott , Petr --- help???
- no wonder no-one recommends these in the real world
Cheers
Russ
-----Original Message-----
From: Victor Cappuccio [mailto:cvictor@protokolgroup.com]
Sent: 08 July 2006 21:20
To: 'Kemal YILDIRIM'; Russell Kelly (rukelly); ccielab@groupstudy.com
Subject: RE: OSPF Virtual Link Issues ---
Resuming the config to the parts that are not needed
interface Serial0/1
ip address 191.1.45.5 255.255.255.128
router ospf 1
router-id 150.1.5.5
area 45 virtual-link 150.1.4.4
network 191.1.45.5 0.0.0.0 area 45
interface Serial0/1
ip address 191.1.45.4 255.255.255.128
router ospf 1
router-id 150.1.4.4
area 45 virtual-link 150.1.5.5
network 191.1.45.4 0.0.0.0 area 45
I do not see any typos.
Also the no passive-interface Serial0/1 had been issued So there is no problem at all with Hellos Did you try to clear the ip ospf process? Or reload the routers?
Maybe you have a Router ID Problem, do a show ip ospf first to see what router id they have
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Kemal YILDIRIM Enviado el: Sabado, 08 de Julio de 2006 04:03 p.m.
Para: 'Russell Kelly (rukelly)'; ccielab@groupstudy.com
Asunto: RE: OSPF Virtual Link Issues ---
Hi there Russ,
AFAIK, in this LAB there was an authentication requirement.
Did you configure OSPF area 0 authentication on another router.
And Router4 config has an typo;
network 191.1.48.4 0.0.0.0 area 4 ----> sould be "area 48"
No Hellos (Passive interface) ----> indicating your problem
As I read many times on GS, do what they are asking, passive interface usage is not a requirement in this scenario, but it can be useful in reallife.
Cheers,
Kemal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Russell Kelly (rukelly)
Sent: Saturday, July 08, 2006 10:33 PM
To: ccielab@groupstudy.com
Subject: OSPF Virtual Link Issues ---
Hi All,
I am running into trouble with Virtual links in OSPF --- I keep getting the following states with the Virtual link (below) ---
The router IDs are correct -- the link is a simple back to back ppp link (with an OSPF adj over it) -- -however I keep getting the following:
On one side:
Virtual Link OSPF_VL2 to router 150.1.5.5 is up
Run as demand circuit
DoNotAge LSA allowed.
Transit area 45, via interface Serial0/1, Cost of using 64
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
No Hellos (Passive interface)
Adjacency State INIT (Hello suppressed)
Index 0/0, retransmission queue length 0, number of retransmission 0
First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
Last retransmission scan length is 0, maximum is 0
Last retransmission scan time is 0 msec, maximum is 0 msec
On the other:
Virtual Link OSPF_VL0 to router 150.1.4.4 is up
Run as demand circuit
DoNotAge LSA allowed.
Transit area 45, via interface Serial0/1, Cost of using 64
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
I am stumped --- all looks fine --- but I'm sure I'm missing something... HELP --- this should be soo simple....??...!!
Here are the relevant pieces of config too:
interface Serial0/1
ip address 191.1.45.5 255.255.255.128
router ospf 1
router-id 150.1.5.5
log-adjacency-changes
area 45 virtual-link 150.1.4.4
network 191.1.45.5 0.0.0.0 area 45
==============================
interface Serial0/1
ip address 191.1.45.4 255.255.255.128
router ospf 1
router-id 150.1.4.4
log-adjacency-changes
area 45 virtual-link 150.1.5.5
network 191.1.45.4 0.0.0.0 area 45
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART