From: Kemal YILDIRIM (kemalhy@gmail.com)
Date: Sat Jul 08 2006 - 17:02:52 ART
Hi there Russ,
AFAIK, in this LAB there was an authentication requirement.
Did you configure OSPF area 0 authentication on another router.
And Router4 config has an typo;
network 191.1.48.4 0.0.0.0 area 4 ----> sould be "area 48"
No Hellos (Passive interface) ----> indicating your problem
As I read many times on GS, do what they are asking, passive interface usage
is not a requirement in this scenario, but it can be useful in reallife.
Cheers,
Kemal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Russell Kelly (rukelly)
Sent: Saturday, July 08, 2006 10:33 PM
To: ccielab@groupstudy.com
Subject: OSPF Virtual Link Issues ---
Hi All,
I am running into trouble with Virtual links in OSPF --- I keep getting
the following states with the Virtual link (below) ---
The router IDs are correct -- the link is a simple back to back ppp link
(with an OSPF adj over it) -- -however I keep getting the following:
On one side:
Virtual Link OSPF_VL2 to router 150.1.5.5 is up
Run as demand circuit
DoNotAge LSA allowed.
Transit area 45, via interface Serial0/1, Cost of using 64
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
No Hellos (Passive interface)
Adjacency State INIT (Hello suppressed)
Index 0/0, retransmission queue length 0, number of retransmission 0
First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
Last retransmission scan length is 0, maximum is 0
Last retransmission scan time is 0 msec, maximum is 0 msec
On the other:
Virtual Link OSPF_VL0 to router 150.1.4.4 is up
Run as demand circuit
DoNotAge LSA allowed.
Transit area 45, via interface Serial0/1, Cost of using 64
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
I am stumped --- all looks fine --- but I'm sure I'm missing
something... HELP --- this should be soo simple....??...!!
Here are the relevant pieces of config too:
interface Serial0/1
ip address 191.1.45.5 255.255.255.128
encapsulation ppp
ip tcp header-compression
ip tcp compression-connections 256
clockrate 64000
!
router ospf 1
router-id 150.1.5.5
log-adjacency-changes
area 45 virtual-link 150.1.4.4
redistribute connected subnets route-map LO0
passive-interface default
no passive-interface Serial0/0
no passive-interface Serial0/1
network 191.1.5.5 0.0.0.0 area 5
network 191.1.45.5 0.0.0.0 area 45
network 191.1.125.5 0.0.0.0 area 0
==============================
interface Serial0/1
ip address 191.1.45.4 255.255.255.128
encapsulation ppp
ip tcp header-compression
ip tcp compression-connections 256
!
router ospf 1
router-id 150.1.4.4
log-adjacency-changes
area 45 virtual-link 150.1.5.5
redistribute connected subnets route-map LO0
passive-interface default
no passive-interface Serial0/0
no passive-interface FastEthernet0/1
no passive-interface Serial0/1
network 191.1.34.4 0.0.0.0 area 34
network 191.1.45.4 0.0.0.0 area 45
network 191.1.48.4 0.0.0.0 area 4
Russ
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART