From: Ivan (ivan@iip.net)
Date: Sat Jul 08 2006 - 16:46:57 ART
class name class-default is unsupported command on some IOS's
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/scg/swuncli.htm#wp1022294
On Saturday 08 July 2006 00:43, Sami wrote:
> Group,
>
> Is there any diffrence between if I use default class or create a class and
> say match any ? task say rate limit incoming traffic to 192K.
> Could some explain when to use class-default and when to use match any.
> what I understand both are same but still clarify from the QoS gurus which
> option to use in exam to get the points.
>
>
> R5#show class-map
> Class Map match-any class-default (id 0)
> Match any
>
> Class Map match-all R5 (id 2)
> Match any
> R5#show policy-map
> Policy Map TEST
> Class class-default
> police cir 192000 bc 6000
> conform-action set-prec-transmit 2
> exceed-action set-prec-transmit 0
>
> R5#show policy-map
> Policy Map TEST1
> Class R5
> police cir 192000 bc 6000
> conform-action set-prec-transmit 2
> exceed-action set-prec-transmit 0
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART