From: Hafizur Rahman \(UK\) (hafizur.rahman@uk.didata.com)
Date: Thu Jul 06 2006 - 14:16:21 ART
Hi Group
I am trying to configure QOS on a cisco 7600 device and trying to
apply
it on a gig interface.
Issue is when I trying to apply it, it
fails, producing following errors
Charon(config)#int g6/8
Charon(config-if)#ser
Charon(config-if)#service-policy in
Pls note error
occurs with "service-policy output" as well
Charon(config-if)#service-policy input bnadr-thus-topCore
QoS: Cannot have
more than one Match dscp | precedence in class CRITICAL
on GigabitEthernet6/8
QoS: policy bnadr-thus-topCore actions for class CRITICAL are not
supported
on GigabitEthernet6/8
QoS: Cannot have more than one Match dscp | precedence
in class CRITICAL
on GigabitEthernet6/8
QoS: Cannot have more than one Match
dscp | precedence in class CRITICAL
on GigabitEthernet6/8
QoS: Cannot have
more than one Match dscp | precedence in class
SIGNALLING on
GigabitEthernet6/8
QoS: Cannot have more than one Match dscp | precedence in
class
SIGNALLING on GigabitEthernet6/8
QoS: Cannot have more than one Match
dscp | precedence in class BULK on
GigabitEthernet6/8
QoS: Cannot have more
than one Match dscp | precedence in class BULK on
GigabitEthernet6/8
QoS:
Cannot have more than one Match dscp | precedence in class DEFAULT
on
GigabitEthernet6/8
QoS: Cannot have more than one Match dscp | precedence in
class DEFAULT
on GigabitEthernet6/8
Following is config
policy-map
bnadr-thus-topCore
class VOICE
priority 180000
class CRITICAL
bandwidth 20000
set ip dscp af32
class SIGNALLING
bandwidth 20000
class BULK
bandwidth 50000
random-detect dscp-based
set dscp af12
class DEFAULT
bandwidth 480000
random-detect dscp-based
set ip
dscp af22
class-map match-any SIGNALLING
match ip dscp af31
match ip
dscp cs3
class-map match-any VOICE
match ip dscp ef
match ip dscp af41
match ip dscp af42
match ip dscp af43
match cos 4
match cos 5
class-map match-any CRITICAL
match ip dscp af32
match ip dscp af33
match ip dscp 29
class-map match-any DEFAULT
match ip dscp af21
match
ip dscp af22
match ip dscp af23
match cos 2
match ip dscp default
class-map match-any BULK
match ip dscp af11
match ip dscp af12
match
ip dscp af13
match cos 1
Any idea. Your help will be highly
appreciated
Thanks in advance
Hafi
-----------------------------------------
Dimension Data - providing global
IP based solutions and services
for over 20 years supported locally from a
single point of contact
This email is confidential. If you are not the
intended recipient
then you must not copy it, forward it, use it for any
purpose, or
disclose it to another person.
Please also note that the
author of this email is not authorised
to; make any offers capable of
acceptance unless expressly stated
in a validly dated and attached document
which shall be subject to
the terms and conditions stated therein or,
conclude any contract
on behalf of Dimension Data by email.
Although
Dimension Data has taken reasonable precautions to ensure
no viruses are
present in this email, the company cannot accept
responsibility for any loss
or damage arising from the use of this
email or attachments.
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:46 ART