RE: RIP triggered

From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Thu Jul 06 2006 - 10:22:42 ART

• Next message: "CCIE: "ip inspect name richard ipx"
• Previous message: Adam Frederick: "Multilink Interface"
• Maybe in reply to: Sami: "RIP triggered"
• Next in thread: Brian Dennis: "RE: RIP triggered"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Because is an extensions to IP RIP increase efficiency of RIP on
point-to-point, serial interfaces.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t1/trigrip.htm

-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Sami
Enviado el: Jueves, 06 de Julio de 2006 07:56 a.m.
Para: ccielab@groupstudy.com
Asunto: RIP triggered

Group,

ip rip triggered command is not under ethernet interface ? is there any
speific reason for not having it ?

R4(config)#int fastEthernet 0/0
R4(config-if)#ip rip ?
  advertise Specify update interval
  authentication Authentication control
  receive advertisement reception
  send advertisement transmission
  v2-broadcast send ip broadcast v2 update

R4(config)#int s0/0/0

R4(config-if)#ip rip ?
  advertise Specify update interval
  authentication Authentication control
  receive advertisement reception
  send advertisement transmission
  triggered enable rfc2091 triggered rip
  v2-broadcast send ip broadcast v2 update

• Next message: "CCIE: "ip inspect name richard ipx"
• Previous message: Adam Frederick: "Multilink Interface"
• Maybe in reply to: Sami: "RIP triggered"
• Next in thread: Brian Dennis: "RE: RIP triggered"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:46 ART