From: Radoslav Vasilev (deckland@gmail.com)
Date: Mon Jul 03 2006 - 10:35:19 ART
Hi,
Are you allowed to use subinterfaces on R1 and R2?
If yes, you could configure R5's interface as P2M.
Rado
On 6/27/06, Sami <sy1977@gmail.com> wrote:
>
> Group,
>
> There is Hub and spoke FR NBMA network. R5 is Hub and using inverse ARP ,
> R1 and R2 spokes no FR inverse arp , use frame-relay map command to reach
> hub.
>
> Task say enable OSPF area 0 on R5,R1 and R2 don't use neighbour command
> on
> R5 to accomplish this and do not use any interface level command on R1
> and
> R2 to accomplish this.
>
> I can't change interface type to polint to multipoint on R1 and R2 and on
> R5
> I can not use neighbour command. I don't think of any other solution to
> make
> it work.
>
> What could be the solution for this task ? unfortunately solution guide
> doesn't say anything...
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:46 ART