From: Sami (sy1977@gmail.com)
Date: Sun Jul 02 2006 - 07:13:11 ART
Thanks Victor , use P-2-MP non-brodcast where broadcast is not
supported...we need neighbour command also to make it work.. right ?
On 7/2/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
>
> For Example when you have a Hub and Spoke topology in a Frame-relay
> Topology, and in the Frame-relay Could Broadcast is not supported
>
> The network type ospf OSPF does not depends on the Physical L2 Interface,
> (OSI Modularity), cool right?
>
> HTH
> Vmctor.-
>
>
> -----Mensaje original-----
> De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Sami
> Enviado el: Domingo, 02 de Julio de 2006 05:45 a.m.
> Para: ccielab
> Asunto: OSPF
>
> Group,
>
> Couldn't understand in which scenario do we need to use
> point-to-multipoint
> non braodcast. FR interface by default is non-braodcast mode.
>
> Appreciate if some one can shed some light on this ?
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:46 ART