From: Bill.McKenzie@bisys.com
Date: Sat Jul 01 2006 - 06:59:27 ART
The set dscp command is the replacement for the set ip dscp command which is being phased out.
----- Original Message -----
From: Sami [sy1977@gmail.com]
Sent: 07/01/2006 05:50 AM
To: CSB <cbalik@adelphia.net>
Cc: "Cisco certification" <ccielab@groupstudy.com>
Subject: Re: DSCP
Group,
What is the diffrence between
set dscp ef
and
set ip dscp ef
Thanks
On 7/1/06, CSB <cbalik@adelphia.net> wrote:
>
> I think it could be counted as bulk and/or scavenger application.
>
> DSCP=CS1=COS1 or AF11=COS1
>
>
> ----- Original Message -----
> From: "Sami" <sy1977@gmail.com>
> To: "Cisco certification" <ccielab@groupstudy.com>
> Sent: Friday, June 30, 2006 2:45 PM
> Subject: DSCP
>
>
> > Group,
> >
> > Genrally we assign ef dscp vlaue to voice traffic. what is the dscp
> value
> > most commanly used for http traffic.
> > Task just say assign a dscp value so that traffic is least likely to be
> > dropped..
> >
> > I am thinking of af33..which is below ef.
> >
> > Thanks
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:46 ART