From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Fri Jun 30 2006 - 09:29:36 ART
And if not statics are allowed then at the interface level
Ip rip send version 1
Regards
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Gavin
Lawson
Enviado el: Viernes, 30 de Junio de 2006 03:01 a.m.
Para: ccielab@groupstudy.com
Asunto: RE: RIP summarization
Static route to null0 for the range you want to summaries.
Redistribute the static routes into RIP.
You may need to use a route map to redistribute the static routes,
depending on whether you have other static routes that could/should be
redistributed.
i.e
ip route 10.10.0.0 255.255.0.0 null0
router rip
version 2
no auto
redist static
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Prakash Sosle R
Sent: Friday, 30 June 2006 12:24 PM
To: Michael Stout
Cc: ccielab@groupstudy.com
Subject: Re: RIP summarization
Sorry , I should have worded it more precisely :
1) you are not allowed to use the " auto-summary command"
2) you are not allowed to use the "ip summary-address" command under the
intf
and also the ip subnet to be advertised is in the class 'A' range and
summary is in Class 'B' range.
regds,
Prakash
On 6/30/06, Michael Stout <michaelgstout@hotmail.com> wrote:
>
> auto-
>
> ------------------------------
> From: *"Prakash Sosle R" <psosle@gmail.com>*
> Reply-To: *"Prakash Sosle R" <psosle@gmail.com>*
> To: *"Cisco certification" <ccielab@groupstudy.com>*
> Subject: *RIP summarization*
> Date: *Fri, 30 Jun 2006 13:20:18 +1000*
>
>
> Hi Group,
>
> How can I summarize a RIP route wihout using the "summary
command"
> under the router process and also not using the "ip summary-address"
> command
> under the interface ?
>
>
>
> regds,
>
> Prakash
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:34 ART