From: Prakash Sosle R (psosle@gmail.com)
Date: Fri Jun 30 2006 - 01:23:37 ART
Sorry , I should have worded it more precisely :
1) you are not allowed to use the " auto-summary command"
2) you are not allowed to use the "ip summary-address" command under the
intf
and also the ip subnet to be advertised is in the class 'A' range and
summary is in Class 'B' range.
regds,
Prakash
On 6/30/06, Michael Stout <michaelgstout@hotmail.com> wrote:
>
> auto-
>
> ------------------------------
> From: *"Prakash Sosle R" <psosle@gmail.com>*
> Reply-To: *"Prakash Sosle R" <psosle@gmail.com>*
> To: *"Cisco certification" <ccielab@groupstudy.com>*
> Subject: *RIP summarization*
> Date: *Fri, 30 Jun 2006 13:20:18 +1000*
>
>
> Hi Group,
>
> How can I summarize a RIP route wihout using the "summary command"
> under the router process and also not using the "ip summary-address"
> command
> under the interface ?
>
>
>
> regds,
>
> Prakash
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:34 ART