From: Feras Abunamous \(fabunamo\) (fabunamo@cisco.com)
Date: Thu Jun 29 2006 - 08:07:07 ART
In the above section there something really odd about the solution. On
all multicast enabled interfaces with sparse mode in the following
setup:
R1-----R3------R4 no tunnels configured all interfaces are multicast
enabled. Why do we need an ip mroute 0.0.0.0 0.0.0.0 < ip add of R3
int> on R4 to make it work where we have two ip igmp group configured
one on R1 and R4. the confusing thing is the solution does not use ip
mroute on R1 and the group configured there is working. But the group
configured on R4 needs the mroute to work? Any ideas from any one?
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:34 ART