From: Church, Chuck (cchurch@netcogov.com)
Date: Wed Jun 28 2006 - 16:31:06 ART
MQC is supported on subints, but the fact that you've got a priority
statement in the policy is why it's failing. If you put the priority
portion on the main interface, and the rest on the subint, it'll work.
Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services
Enterprise Network Engineering
Home Office - 864-335-9473
Cell - 864-266-3978
cchurch@netcogov.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joe Rinehart
Sent: Wednesday, June 28, 2006 3:16 PM
To: 'Sami'; 'Cisco certification'
Subject: RE: Ethernet subinterface
I have never been able to get that to work on subinterfaces.....
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sami
Sent: Wednesday, June 28, 2006 9:48 AM
To: Cisco certification
Subject: Ethernet subinterface
Group,
While doing some QoS stuff , Router complains it can't apply service
policy
to subinterfaces.
Is MQC not supported on subinterfaces ?
policy-map 64KVOIP
class VOIP
priority 64
policy-map shape
class class-default
shape average 3000000
R5(config-subif)#service-policy output 64KVOIP
CBWFQ : Not supported on subinterfaces
Thanks
Sami
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART