VoIP QoS and TCP port 1720

From: elias.chari@gmail.com
Date: Sun Jun 25 2006 - 10:02:33 ART

• Next message: forwardtruth@yahoo.com: "Tag match and set , redistributing routing loop prevention"
• Previous message: Petr Lapukhov: "Re: Strom Control"
• Next in thread: Scott Morris: "RE: VoIP QoS and TCP port 1720"
• Maybe reply: Scott Morris: "RE: VoIP QoS and TCP port 1720"
• Maybe reply: Kayode Oladipo: "RE: VoIP QoS and TCP port 1720"
• Maybe reply: Scott Morris: "RE: VoIP QoS and TCP port 1720"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I have seen in a vendor's workbook various examples of prioritising VoIP, in some occassions a class is used with NBAR to match protocol rtp and in others an ACL to match the udp port range used for RTP and also matching the Voice GW signalling on TCP 1720. The wording of the tasks was pretty much identical but the solutions differ!

What is your opinion when asked to prioritise VoIP in the Lab, should one always include TCP 1720?

Thanks
Elias

• Next message: forwardtruth@yahoo.com: "Tag match and set , redistributing routing loop prevention"
• Previous message: Petr Lapukhov: "Re: Strom Control"
• Next in thread: Scott Morris: "RE: VoIP QoS and TCP port 1720"
• Maybe reply: Scott Morris: "RE: VoIP QoS and TCP port 1720"
• Maybe reply: Kayode Oladipo: "RE: VoIP QoS and TCP port 1720"
• Maybe reply: Scott Morris: "RE: VoIP QoS and TCP port 1720"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART