Re: Mac access-list protocol list on Univercd?

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Sat Jun 24 2006 - 09:38:22 ART

A good reference of Ethertypes:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hbr_r/br_aph.htm

[IOS Bridging Command Reference Appendix]

As for LSAP values, I don't know of a good link in DocCD. I usually use this
one
in real life:

http://www.cisco.com/warp/public/473/111_12.html

It's not hard to remember some major ones, notably IEEE STP and SNAP :)
(PVST+ aka SSTP uses SNAP encapsulation. Go figure ;)

I don't think we need anything else nowdays, though who knows for sure ;)

HTH 

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
2006/6/24, Paul Dardinski <pauld@marshallcomm.com>:
>
> Does anyone know if there any listing of protocols for use in mac acl's
> anywhere on the univercd? Specifically, ARP/STP, etc? I seem to keep
> tripping up over this as there are many layer 2 protocols that each have
> their own matching id's.
>
>
>
> Thanks,
>
> PD
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART