From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Fri Jun 23 2006 - 16:34:36 ART
Hi,
Does this helps?
http://www.cisco.com/warp/public/459/bgpfaq_5816.shtml#five
Auto Summary is disabled by default, that does not means that R1,2,3,Sw1 has
the auto enabled
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de zillah
Enviado el: Viernes, 23 de Junio de 2006 03:19 p.m.
Para: ccielab@groupstudy.com
Asunto: BGP, applies auto-summary to routes originated via redistribution
Can anyone shed some light?
forwardtruth@yahoo.com wrote: Lab 2 V1 Task 6.7-6.9 Breakdown
By default when a route is redistributed into BGP it is automatically
summarized to the classful boundary. To disable this behavior, issue the
routing
process sub-command no auto-summary. Note that auto-summary in BGP only
applies to routes originated into BGP via redistribution, and does not
affect routes
originated via the network statement.
Why this command has been used with Lab 7 V3 Task 5.1 R6, since we have not
used redistribution command with BGP under this router ?
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART