From: Tim Chan (timanji@yahoo.com)
Date: Wed Jun 21 2006 - 01:29:32 ART
I'm trying to setup RIP authentication with 3 routers, R1, R2, and R3.
R1 being the hub and R2/R3 are the spokes via f/r. If I setup both spokes
with the same key # and password, it all works. But when I make one
of the spokes with a different key, it fails. I reverse R2 and R3, and the problem
follows the router trying to authenticate with the second key #. I have
tried both clear text and MD5 with the same results. What am I doing
wrong?
On R1 I have:
key chain test
key 1
key-string cisco
key 2
key-string cisco2
interface Serial0/0.2 multipoint
ip address 150.50.100.1 255.255.255.0
ip rip authentication key-chain test
frame-relay map ip 150.50.100.2 102 broadcast
frame-relay map ip 150.50.100.3 103 broadcast
R2:
key chain test
key 2
key-string cisco2
interface Serial1/3
ip address 150.50.100.2 255.255.255.0
ip rip authentication key-chain test
encapsulation frame-relay
frame-relay map ip 150.50.100.1 201 broadcast
R3:
key chain test
key 1
key-string cisco
interface Serial1/0
ip address 150.50.100.3 255.255.255.0
ip rip authentication key-chain test
encapsulation frame-relay
frame-relay map ip 150.50.100.1 301 broadcast
Thanks for your help.
-tim
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1"/min.
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART