From: Kulcsár
Date: Tue Jun 20 2006 - 15:09:43 ART
Hi,
I think if you change a VACL you have to first do a "no vlan filter <filter name> vlan" and the reapply the vlan filter to have the changes take affect.
Regards,
Andras Kulcsar
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Sami
Sent: Tuesday, June 20, 2006 1:01 PM
To: Petr Lapukhov
Cc: Cisco certification
Subject: Re: VACL
Hi Petr,
Rebooted SW1 and SW2 , looks it working after reboot ... 3550 behaves like windows .. strange !!!!
Thanks for your prompt reply
-Sami
On 6/20/06, Sami <sy1977@gmail.com> wrote:
>
> Petr,
>
> STP doesn't work show spanning tree vlan 56 shows all the ports are
> in forwarding state and I can't ping from R5 to R6 which is in VLAN
> 56. after removing this VACL everything is fine ,I can ping , STP
> start working and port 13 and 14 goes into bloking state.
>
> I looked in solution guide , doing exactly same configuration but
> still things doesn't work.
>
> Thanks
>
>
>
>
> On 6/20/06, Petr Lapukhov <petr@internetworkexpert.com> wrote:
> >
> > Sami,
> >
> > exactly what does not work.
> >
> > I've just loaded Lab 11, it work fine for me.
> >
> > STP, IP, ARP run smoothly, IPX is dropped :)
> >
> > --
> > Petr Lapukhov, CCIE #16379
> > petr@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > <http://www.internetworkexpert.com/>
> > Toll Free: 877-224-8987
> > Outside US: 775-826-4344
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART