Re: VACL

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Tue Jun 20 2006 - 10:31:11 ART

• Next message: Sami: "Re: VACL"
• Previous message: Popgeorgiev Nikolay: "RE: Doubt in CAR : Rate limit"
• Maybe in reply to: Sami: "VACL"
• Next in thread: Sami: "Re: VACL"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Sami,

no, there is nothing special here. VACL permits any IP traffic, so OSPF
should
be fine.

And besides, you apply vlan access-map to VLAN56 only, that should not
affect any other VLANs. Try debugging ajdacencies and checking system
MTU, as a standard technique :)

Also, double check your VLAN access-map and it's application.

By the way, did you change the ACL from IEEE_STP to someting like
PVST_STP ?:) That's a real fun, some people must have get spanning-tree
loops with that ;)

HTH,

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344

• Next message: Sami: "Re: VACL"
• Previous message: Popgeorgiev Nikolay: "RE: Doubt in CAR : Rate limit"
• Maybe in reply to: Sami: "VACL"
• Next in thread: Sami: "Re: VACL"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART