From: Godswill Oletu (oletu@inbox.lv)
Date: Mon Jun 19 2006 - 22:54:48 ART
Does this Help?
R3725-R3(config-if)#rate-limit output ?
<8000-2000000000> Bits per second <------------------------
access-group Match access list
dscp Match dscp value
qos-group Match qos-group ID
R3725-R3(config-if)#rate-limit output 8000000 ?
<1000-512000000> Normal burst bytes <----------------------------
R3725-R3(config-if)#rate-limit output 8000000 18750 ?
<2000-1024000000> Maximum burst bytes
<---------------------------------------
R3725-R3(config-if)#rate-limit output 8000000 18750 37500 ?
conform-action action when rate not exceeded
R3725-R3(config-if)#rate-limit output 8000000 18750 37500 conform-action
set-prec-transmit 5 exceed-action drop
HTH
Godswill Oletu
----- Original Message -----
From: "Maximus" <victorius@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Monday, June 19, 2006 9:20 PM
Subject: Fwd: Doubt in CAR : Rate limit
> sorry made a small typo... this is the exact config i have done
>
> hie all just a lil confusion
>
> the requiremenet is "traffic is limited to 8 Mbps, with a normal burst
size
> of 150kbps and an Max Burst size of 300kbps. traffic that conforms is sent
> with an IP precedence of 5. Traffic that does not conform is dropped. "
>
>
> rate-limit output 8000000 150000 300000 conform-action set-prec-transmit 5
>
> is my config rite ? the confision is in normal n max is it in bytes or
> bits...somebody please lead me out...
>
>
> --
> regards,
>
> Max
>
>
> --
> regards,
>
> Maximus
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART