From: Thomwin Chen (thomwin_chen@yahoo.com)
Date: Sat Jun 17 2006 - 10:37:30 ART
Hi Maximus,
I think they are not the same.
the data vlan on your first config is still on VLAN 1.
you can verify it by using show interfaces switchport command.
CMIIW.
thanks
Rgds,
Thomwin
Maximus <victorius@gmail.com> wrote:
are they both the same ?
if my requirement is voice vlan is 10, data on 7, change only the COS(802.1p)
of data to 1
config 1
-----------
mls qos
!
interface FastEthernet0/7
switchport trunk encapsulation dot1q
switchport native vlan 7
switchport voice vlan 10
switchport priority extend cos 1
mls qos trust cos
config 2
--------------
mls qos
!
interface FastEthernet0/7
switchport access vlan 7
switchport voice vlan 10
switchport priority extend cos 1
mls qos trust cos
-- regards,Max
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART