Re: Set BGP Metic in Routes

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Sat Jun 17 2006 - 04:53:14 ART

• Next message: nisha rani: "CCIE LAB Study"
• Previous message: Jai Prakash: "Re: Exckuding certain addresses in Area range command"
• Maybe in reply to: Victor Cappuccio: "Set BGP Metic in Routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Victor,

By default, when you announce a network to BGP, it copies MED
value from IGP metric. You may use route-map to set different value.

When you advertise connected prefix, for instance, you get MED=0.

Just remember, that MED is non-transitive, and is removed, after
crossing one AS.

Also, AFAIR metric is removed when you do an "aggregate-address",
but you may set it with "attribute-map".

HTH

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/

• Next message: nisha rani: "CCIE LAB Study"
• Previous message: Jai Prakash: "Re: Exckuding certain addresses in Area range command"
• Maybe in reply to: Victor Cappuccio: "Set BGP Metic in Routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART