From: Sami (sy1977@gmail.com)
Date: Tue Jun 13 2006 - 14:22:48 ART
Group,
Hope some IPV6 guru can reply my question.
I configured rip for advertising only default routes but I can see it's
advertising specific as well as default route..what could be the issue ?
R3#
interface Serial0/3/0
bandwidth 10000
ip address 191.1.23.3 255.255.255.0
ip pim dense-mode
encapsulation ppp
ipv6 address 2001:CC1E:1:23::3/64
ipv6 enable
ipv6 rip cisco enable
ipv6 rip cisco default-information only
clock rate 2000000
R5#show ipv6 route
IPv6 Routing Table - 12 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
R ::/0 [120/4]
via FE80::213:80FF:FE50:B190, Serial0/0/0
R 2001:192:10:1::/64 [120/4]
via FE80::213:80FF:FE50:B190, Serial0/0/0
R 2001:205:90:31::/64 [120/5]
via FE80::213:80FF:FE50:B190, Serial0/0/0
R 2001:220:20:3::/64 [120/5]
via FE80::213:80FF:FE50:B190, Serial0/0/0
R 2001:222:22:2::/64 [120/5]
via FE80::213:80FF:FE50:B190, Serial0/0/0
C 2001:CC1E:1:5::/64 [0/0]
via ::, FastEthernet0/0
L 2001:CC1E:1:5::5/128 [0/0]
via ::, FastEthernet0/0
R 2001:CC1E:1:23::/64 [120/3]
via FE80::213:80FF:FE50:B190, Serial0/0/0
C 2001:CC1E:1:125::/64 [0/0]
via ::, Serial0/0/0
L 2001:CC1E:1:125::5/128 [0/0]
via ::, Serial0/0/0
L FE80::/10 [0/0]
via ::, Null0
L FF00::/8 [0/0]
via ::, Null0
R5#
Thanks
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART