From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Jun 12 2006 - 23:03:28 ART
Yes, I believe this is correct. A number of folks mentioned to change
the way that the acl is placed "0.0.0.0 255.255.255.255" ....so, I
completely cleared the lab and redid it with this configuration, but
this does not work (I just saw you did that too). I believe that the
only way to change the external source is through the distribute eigrp
<int> <ext> command.
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: Nick Griffin [mailto:ngriffin@sio.midco.net]
Sent: Monday, June 12, 2006 9:59 PM
To: Schulz, Dave
Cc: ccielab@groupstudy.com
Subject: Re: specific distance command in eigrp
Dave, I just tried it to, your right. I believe I recall BD and SM
mentioning this. Ie, no way to single out an external eigrp route this
way. It's all our nothing is my belief.
Nick Griffin
Schulz, Dave wrote:
> I was working on some redistribution and routing/distance issues with
> eigrp. I noticed that the command to get a specific distance to
change
> on the routing process, "distance xxx <ip source> <mask> <acl>", will
> only apply to eigrp routes that are internal, not external eigrp
routes.
> Please correct me if I am wrong on this. Labbed it up tonight and it
> appears to be acting this way. Any thoughts?
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
>
> c
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART