From: Michael Stout (michaelgstout@hotmail.com)
Date: Mon Jun 12 2006 - 22:57:34 ART
This is a variation:
R5(config-router)#distance eigrp 89 169
D EX 151.10.21.0/24 [169/18073600] via 151.10.35.3, 00:00:43,
Serial0/1
D 151.10.23.0/24 [89/18560000] via 151.10.35.3, 00:00:43, Serial0/1
Here is another variation:
distance 60 0.0.0.0 255.255.255.255 99
!
access-list 99 permit 151.10.23.0 0.0.0.255
access-list 99 permit 151.10.21.0 0.0.0.255
!
D 151.10.23.0/24 [60/18560000] via 151.10.35.3, 00:02:27, Serial0/1
D 151.10.102.0/24 [90/3200000] via 151.10.25.2, 00:00:22, Serial0/0
D EX 151.10.21.0/24 [169/18073600] via 151.10.35.3, 00:02:28, Serial0/1
!!
Here is the whole thing
router eigrp 1
distance eigrp 90 169
distance 60 0.0.0.0 255.255.255.255 99
!
access-list 99 permit 151.10.23.0 0.0.0.255
access-list 99 permit 151.10.21.0 0.0.0.255
--------------------------------------------------------------------
From: "Schulz, Dave" <DSchulz@dpsciences.com>
Reply-To: "Schulz, Dave" <DSchulz@dpsciences.com>
To: <ccielab@groupstudy.com>
Subject: specific distance command in eigrp
Date: Mon, 12 Jun 2006 21:22:22 -0400
I was working on some redistribution and routing/distance issues with
eigrp. I noticed that the command to get a specific distance to
change
on the routing process, "distance xxx <ip source> <mask> <acl>", will
only apply to eigrp routes that are internal, not external eigrp
routes.
Please correct me if I am wrong on this. Labbed it up tonight and it
appears to be acting this way. Any thoughts?
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
c
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART