Frame relay

From: Sami (sy1977@gmail.com)
Date: Thu Jun 08 2006 - 10:04:32 ART

• Next message: Ivan: "Re: Restricting multicast traffic in frame-relay."
• Previous message: daniel fischer: "RE: NetFlow Analyser"
• Next in thread: Ashwin Iyer: "Re: Frame relay"
• Maybe reply: Ashwin Iyer: "Re: Frame relay"
• Maybe reply: Nisar, Munsar: "RE: Frame relay"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Group,

Appreciate if some one can clarify this..

Physical port in FR ex..s0/0/0 is a multipoint port by default , so we use
frame relay map ip x.x.x.x <DLCI> broadcast keyword to reach spokes. But
same time it also accept frame relay interface-dlci command ..as far as I
know interface-dlci command is used only for point to point connection....so
in nutshell if there is only one peer then we use interface-dlci command on
physical port..if there are multiple peer then we use map command..

Is my understanding correct ?

Thanks

• Next message: Ivan: "Re: Restricting multicast traffic in frame-relay."
• Previous message: daniel fischer: "RE: NetFlow Analyser"
• Next in thread: Ashwin Iyer: "Re: Frame relay"
• Maybe reply: Ashwin Iyer: "Re: Frame relay"
• Maybe reply: Nisar, Munsar: "RE: Frame relay"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART